Real-time control architecture for a multi UAV test bed

The purpose of this thesis is to develop a control architecture running at real-time for a multi unmanned aerial vehicle test bed formed by three AscTec Hummingbird mini quadrotors. The reliable and reconfigurable architecture presented here has a FPGA-based embedded system as main controller. Under the implemented control system, different practical applications have been performed in the MARHES Lab at the University of New Mexico as part of its research in cooperative control of mobile aerial agents. This thesis also covers the quadrotor modeling, the design of a position controller, the real-time architecture implementation and the experimental flight tests. A hybrid approach combining first-principles with system identification techniques is used for modeling the quadrotor due to the lack of information around the structure of the onboard controller designed by AscTec. The complete quadrotor model structure is formed by a black-box subsystem and a point-mass submodel. Experimental data have been gathered for system identification and black-box submodel validation purposes; while the point-mass submodel is found applying rigid-body dynamics. Using the dynamical model, a position control block based in lead-lag and PI compensators is developed and simulated. Improvements in trajectory tracking performance are achieved estimating the linear velocity of the aerial robot and incorporating velocity lead-lag compensators to the control approach. The velocity of the aerial robot is computed by numerical differentiation of position data. Simulation results to a variety of input signals of the control block in cascade with the complete dynamic model of the quadrotor are included. The control block together with the velocity estimation is fully programmed in the embedded controller. A graphical user interface, GUI, as part of the architecture is designed to display real-time data of position and orientation streamed from the motion tracking system as well as to contain useful user controllers. This GUI facilitates that a single operator conducts and oversees all aspects of the different applications where one or multiple quadrotors are used. Experimental tests have helped to tune the control parameters determined by simulation. The performance of the whole architecture has been validated through a variety of practical applications. Autonomous take off, hovering and landing, target surveillance, trajectory tracking and suspended payload transportation are just some of the applications carried out employing the real-time control architecture proposed in this thesis

Exploiting Heterogeneity in Networks of Aerial and Ground Robotic Agents

By taking advantage of complementary communication technologies, distinct sensing functionalities and varied motion dynamics present in a heterogeneous multi-robotic network, it is possible to accomplish a main mission objective by assigning specialized sub-tasks to specific members of a robotic team. An adequate selection of the team members and an effective coordination are some of the challenges to fully exploit the unique capabilities that these types of systems can offer. Motivated by real world applications, we focus on a multi-robotic network consisting off aerial and ground agents which has the potential to provide critical support to humans in complex settings. For instance, aerial robotic relays are capable of transporting small ground mobile sensors to expand the communication range and the situational awareness of first responders in hazardous environments. In the first part of this dissertation, we extend work on manipulation of cable-suspended loads using aerial robots by solving the problem of lifting the cable-suspended load from the ground before proceeding to transport it. Since the suspended load-quadrotor system experiences switching conditions during this critical maneuver, we define a hybrid system and show that it is differentially-flat. This property facilitates the design of a nonlinear controller which tracks a waypoint-based trajectory associated with the discrete states of the hybrid system. In addition, we address the case of unknown payload mass by combining a least-squares estimation method with the designed controller. Second, we focus on the coordination of a heterogeneous team formed by a group of ground mobile sensors and a flying communication router which is deployed to sense areas of interest in a cluttered environment. Using potential field methods, we propose a controller for the coordinated mobility of the team to guarantee inter-robot and obstacle collision avoidance as well as connectivity maintenance among the ground agents while the main goal of sensing is carried out. For the case of the aerial communications relays, we combine antenna diversity with reinforcement learning to dynamically re-locate these relays so that the received signal strength is maintained above a desired threshold. Motivated by the recent interest of combining radio frequency and optical wireless communications, we envision the implementation of an optical link between micro-scale aerial and ground robots. This type of link requires maintaining a sufficient relative transmitter-receiver position for reliable communications. In the third part of this thesis, we tackle this problem. Based on the link model, we define a connectivity cone where a minimum transmission rate is guaranteed. For example, the aerial robot has to track the ground vehicle to stay inside this cone. The control must be robust to noisy measurements. Thus, we use particle filters to obtain a better estimation of the receiver position and we design a control algorithm for the flying robot to enhance the transmission rate. Also, we consider the problem of pairing a ground sensor with an aerial vehicle, both equipped with a hybrid radio-frequency/optical wireless communication system. A challenge is positioning the flying robot within optical range when the sensor location is unknown. Thus, we take advantage of the hybrid communication scheme by developing a control strategy that uses the radio signal to guide the aerial platform to the ground sensor. Once the optical-based signal strength has achieved a certain threshold, the robot hovers within optical range. Finally, we investigate the problem of building an alliance of agents with different skills in order to satisfy the requirements imposed by a given task. We find this alliance, known also as a coalition, by using a bipartite graph in which edges represent the relation between agent capabilities and required resources for task execution. Using this graph, we build a coalition whose total capability resources can satisfy the task resource requirements. Also, we study the heterogeneity of the formed coalition to analyze how it is affected for instance by the amount of capability resources present in the agents